Eliminate "Hot Foot" & Numbness

Stock insoles collapse under load, compressing forefoot nerves. Cobra9’s lightweight carbon fibre InnerCore supports the arch and pairs with a cushioned EVA foam topcover for forefoot comfort.

Increase Your Power

At just 59g a pair, Cobra9’s non-fatiguing carbon fibre chassis creates a direct, rigid platform that transfers every ounce of effort straight to the pedals.

Correct Knee & Hip Alignment

An unsupported arch collapses and pronates under load. Cobra9’s carbon fibre structure prevents arch collapse, stabilizing your foot to relieve knee, hip, and saddle issues.

Cobra9 Trusted Since 2009

2009

Founded in 2009

COBRA9 Founded in Hobart Tasmania by Nathan White whilst working in a sports lab. He was riding regularly and saw how poor the insoles were inside cycling shoes. Minimal support and design driven primarily from walking insoles with too much volume. First prototypes were designed in polypropylene and tested in Tasmania. The name comes from the year the company commenced (2009) paired with the carbon weave that looks like a snake skin (COBRA). Hence COBRA9. 

2009

First prototypes

Initially all prototypes and COBRA9 insoles were built custom for clients. The casting process utilised an impression foam allowing better reference to a semiweightbearing foot. All modifications and additions were built in the lab in Hobart and finished insoles were posted all around Australia. 

2011

Cobra9 race team

COBRA9 race team commenced. A small squad of amateur riders primarily focused on social riding and low level racing. This team continues to this day as an elite male and female team based out of Brisbane racing in the elite Provelo series making COBRA9 racing one of the longest continual tenured racing teams in Australia. The current squad races under the COBRA9 Leigh Surveyors banner and has aided many riders in their journey from juniors to experiencing the WorldTour including Kaden Groves, Blake Quick and most recently Ollie Sims. 

2013

COBRA9 SemiPro is launched

A prototype of the off the shelf ready to wear version is created in Hobart. The initial prototypes used a carbon composite weave that allowed heat molding. Whilst the idea behind this concept was sound, the application created complications and user error and this version of the product was discontinued after a short period of time.

2014

Cobra9 SemiPro refined

The new version of COBRA9 SemiPro is launched. This version was hand built using carbon fibre and came in 3 arch profiles and 4 sizes. This version was a much more commercially ready version and reduced user error.

2015

Cobra9 X The Pedaler

COBRA9 Labs moved to Brisbane in partnership with The Pedaler. The Pedaler serves a health hub for cyclists and provides bike fitting, insoles and shoe prescription. The health hub also serves as a crucial testing facility for new products.

2016-2022

Cobra9 continues to evolve

Daniel Perkins joins the team as an experienced Podiatrist and keen lab technician. Extensive product testing and modification. Carbon design and layout altered to improve comfort and flex. Dual density topcover designed and incorporated into the range allowing more forefoot comfort. Custom versions designed for shoes including Sidi, Nimbl and Bont. 

2023

Cobra9 X Bont

COBRA9 partners with Bont to design and create insoles used across all Bont cycling.

2024

Dr Jonathon Birch

Biomechanist Dr Jonathon Birch joins the team overseeing operations and product development.

2025

Neill Stanbury & Equipo Kem Pharma

Bespoke COBRA9 SemiPro designed for Neill Stanbury with optional additions suitable for further tuning of the insoles. 

Custom cover option launched including some wild custom graphics. 

COBRA9 sponsors Equipo Kern Pharma in the ProTour.

2026

Cobra9 X bicycle.

COBRA9 commences roll out of international networks including partnering with Bicycle in the UK. Bike Fitting additions launched in partnership with BikeFit James.

59g a pair (XL)

Cobra9 is less than half the weight compared to other bestselling footbeds the G8 performance 2620 (133g)

Non-Fatiguing Carbon Fibre

Unlike plastic arch inserts that soften and flatten, carbon fibre springs back under every pedal stroke and won't wear out.

Ultra-Low Profile 

Eliminates heel lift and preserves precious toe-box and instep volume inside tight fitting cycling shoes.

Load video:

"The foot is where all the power goes—or where all the power is lost. Up until recently, our go-to footbed was the G8 Performance 2620. Then we found Cobra9. Not only is it lighter, longer-lasting, more supportive, and lower volume—it's also cheaper. You stick it in the shoe, it provides a load of support, and you can just get on with riding your bike."

— BikeFit James, Bicycle.

Bike Fit additions

Medial Heel Wedging: Bolsters the inside of the heel to stop excessive arch collapse (pronation) and stabilize knee tracking.

Additional Arch Support Filler: Adds extra height under a single arch for riders with asymmetrical feet or extreme arch demands.

Hot Spot Relief Pad (2nd–4th Metatarsal Cutout): Adheres to the underside to offload pressure from the middle metatarsal heads—the primary culprit behind "hot foot" and toe numbness.

Metatarsal Domes: Placed on top to prevent transverse arch collapse and forefoot neural discomfort.

Reverse Morton’s Extension: Targets a plantarflexed first ray (dropped big-toe joint) to redistribute forefoot load.

Interested in Cobra9?

Foot support plays a key role in comfort, stability, and efficiency on the bike, which is why insoles can be tried and assessed as part of our shoe sizing service, or integrated into a full bike fit. This allows us to evaluate shoe fit, foot support, and cleat alignment together, ensuring you leave with a setup that works seamlessly for your riding.

Shoe Sizing

At bicycle, we want to make sure your shoe choice is the right one for you. Our shoe sizing service focuses on finding the correct size, shape, and fit for your feet, taking into account foot width, volume, and support needs.

Bike Fitting

The best fit starts from the feet up. Insoles play a key role in stability, power transfer, and injury prevention. Integrate insoles into our industry-leading bike fitting service for a fully optimised setup.

FAQs

Where can I buy Cobra9 cycling insoles in the UK?

You can buy Cobra9 cycling insoles online and in-store at Bicycle in Richmond, London, the official UK retail and custom-fitting hub for Cobra9. We carry the full range of Cobra9 SemiPro carbon footbeds and additions.

How do I choose between Low, Medium, High and Extra High arch Cobra9 SemiPro insoles?

Cobra9 SemiPro insoles come in four carbon arch heights: Low, Medium, High, and Extra High. Unlike soft foam insoles, rigid carbon fibre provides noticeably firmer support—so riders with flat or less flexible feet typically suit Low or Medium, while neutral to high-arched riders suit Medium, High, or Extra High. For exact arch matching and SemiPro additions, book a bike fit here at Bicycle.

Will Cobra9 insoles fit inside my cycling shoes?

Yes. Cobra9 SemiPro footbeds feature an ultra-low profile heel cup and lightweight 59g low-volume design, preventing heel slip and preserving toe-box space inside tight road, gravel, and MTB shoes. Bicycle Richmond stocks the wide-forefoot trim-to-fit model across six sizes (EU 36–49), allowing easy trimming to fit Lake, Shimano, Specialized, Bont, Sidi, Fizik, and Nimbl cycling shoes.

What is the difference between Cobra9 SemiPro and full custom cycling insoles?

The Cobra9 SemiPro (£80) is a ready-to-wear, off-the-peg carbon fibre cycling insole available in four arch profiles and six sizes, suitable for most riders out of the box or with minor bike fit add ons. Full Custom Cobra9 Pro orthotics are bespoke carbon footbeds engineered by Cobra9’s Australian podiatry team using a semi-weightbearing foam impression taken here at bicycle, which is then 3D scanned and sent to Cobra9’s podiatry lab in Australia for manufacture.

Do carbon cycling insoles help prevent hot foot and toe numbness?

Yes. "Hot foot" and toe numbness are commonly caused by unsupportive stock insoles collapsing under load, which allows the arch to drop and compresses the nerves between your metatarsal heads. Cobra9’s rigid carbon fibre chassis stabilizes your arch to offload forefoot pressure, pairing with a cushioned dual-density EVA topcover (and optional metatarsal domes or hot spot relief pads) to keep your feet comfortable on long rides.